SIZE PER SHEET :
500 x 750 x 3.0mm
530 x 190 x 1.5mm

AVAILABLE:
Singles Sheets
Box of 10

The post VELOCITY HIGH PERFORMANCE SELF ADHESIVE SOUND DEADENING SHEETS appeared first on Body Shop Australia.

Lite is easy to form. As the top aluminium lay is thinner (0.05mm), this product suits applications where greater versatility is required on irregular surfaces such as under bonnet, motorcycle fairings, inner guards, air boxes, batteries etc

Peel & Stick Heat Shield Heavy (0.25mm aluminium thickness) is best used for applications over flatter surfaces or near exhaust systems and heat elements use. It is also recommended for road facing applications as it has greater puncture resistance.

Pros- Direct apply to surface being protected, ideal for tight spaces. Can be applied to plastic surfaces e.g. fuel tanks. Available in two aluminum thicknesses.
Unsure which product to use? Watch our YouTube clips below.

FEATURES:

• Light Weight
• Easily formed into place
• Very effective in limited space
• Approved at several major OEM’s
• Acoustical sound deadening benefits without the squeak or rattle issues of stampings
• Interior or exterior applications
• Easy installation – just peel off the release liner and adhere to surface.

APPLICATIONS
Fuel tank/system
Tunnel shields
Floor pans
Exhaust systems
Body shields
Transmissions
Steering components
Fluid lines
Rubber mounts
Axle bushings

The post CAR BUILD PEEL & STICK HEAT SHIELD HEAVY – LARGE 1065 X 605 X 3.75MM appeared first on Body Shop Australia.

It is suitable for 4×4’s, convertibles and industrial vehicles, which get constantly exposed to wet environments.
Car Builders Water Proof Carpet Underlay will not stay damp, smell, rot or attract mould like pre-dated cotton mill scrap, traditionally used under carpets.

It comes with a peel and stick backing and is easy to cut and install. It is also effective as a thermal barrier to reduce heat transfer from the exterior of your vehicle.  The material will reduce radiant heat by up to 20°C, and can be the difference between discomfort and pleasure.

FEATURES:

• Light Weight
• Easy installation – just peel off the release liner and adhere to surface.
• Cuts with scissor and knife
• Reduces heat transfer
• Does not rot or deteriorate
• Applications
• Under carpets
• Roof skins
• Inside cavities
• 1/4 panels
• Doors
• Firewalls

SPECIFICATIONS:
Size:Each box comes with 1 sheet inside
Thickness: 10MM
Weight: 0.55KG/SM
Sheet size: 1800 X 950MM IN 1.714 SQ/M
Material: Closed Cell foam
Adhesive Resistance Temperature Range:-40°C to +110°C (long term) +135°C (short term)
Flame retardant: Yes, B2

The post CAR BUILDERS WATER PROOF CARPET UNDERLAY STAGE 2 1.8 appeared first on Body Shop Australia.

FEATURES

• Peel and stick
• Open cell foam is great for sound dampening
• Flexible in all directions and will not crease easily like traditional woven face material foam.
• Shipped in protective packaging, with guaranteed delivery of quality product not creased or damaged
• 100% Black in colour
• Supreme durability
• Super flexible
• Premium self-adhesive backing
• Temperature rated to 405°F
• Will not ignite
• Wrinkle free
• Super flexible
• Premium self-adhesive backing
• Temperature rated to 405°F
• Will not ignite
• Wrinkle free

SPECIFICATIONS:
Sheet Size: 1500mm x 1000mm
Thickness: 5.5mm PREMIUM 12MM STANDARD
Material: Polyester fibre
Backing: Self-adhesive with plastic film

The post CAR BUILDERS UNDER BONNET INSULATION appeared first on Body Shop Australia.

FEATURES:

• Heavy duty sound blocking
• Water resistant
• Removable
• Cuts with scissor and knife
• Reduces heat transfer
• Does not rot or deteriorate

APPLICATIONS:

• Firewalls
• Cargo areas
• Van floors
• Boot floors
• It is not 100% necessary to put Stage 1 Sound Deadener underneath Mass Noise Liner on cargo area floors or van floors due to the metal already being fairly rigid from the ribs. The Mass Noise Liner will be an effective floor sound proofing by itself.

USED FOR:
4WD’s and muscle cars – firewall barrier to reduce engine noise
Trucks – reduce engine noise and heat on floors and firewalls, great for serviceability
Exhaust drone – drop in as a boot liner to reduce exhaust drone particular common in 6’s, V8’s and flat fours.
Engine rooms, compressors etc

Note: due to the weight of our Mass Noise Liner it is not recommended for use on the underside of horizontal surfaces. For these applications you should use our light weight foam such as Acoustic Liner, Water proof carpet underlay, Under bonnet insulation or our 6mm Insul-layer.

SPECIFICATIONS
Sheet length: 1600MM
Sheet width: 950MM
Sheet thickness: 12MM (2MMVINYL, 10MM FOAM)
Weight: 4.5KG / SQM
“Temperature resistance: 130°C”
“Flammability: UL94 V0″
“Foam flame retardant: Grade B2″

The post CAR BUILDERS MASS NOISE LINER appeared first on Body Shop Australia.

FEATURES:

• Light Weight
• Easy installation – just peel off the release liner and adhere to surface.
• Cuts with scissor and knife
• Reduces heat transfer
• Does not rot or deteriorate
• Affordable

APPLICATIONS:

• Roof skins
• Inside cavities
• 1/4 panels
• Doors
• In-between trim panels to reduce vibrations/rattles (3mm Insul-Layer’s main purpose)
• Vans & campers (6.5M Roll is perfect for these)
• (6.5M Roll is plain black, no branding)

SPECIFICATIONS
Length: 1200MM OR 6.5M
Width: 900MM
Weight (6mm): 0.6KG/SHEET
“Temperature resistance (long term): -40°C to 110°C”
Temperature resistance (short term): -40°C to 135°C

The post CAR BUILDERS INSUL-LAYER appeared first on Body Shop Australia.

PROS & CONS

• Pros- Can be fitted to heat source or protected surface. Can be mechanically fastened.
• It can be effectively used in various applications such as:
• Engine compartments
• Exhaust systems
• Under carriages
• Industrial application

The post CAR BUILDERS ALUMINUM EMBOSSED EXHAUST HEAT SHIELD appeared first on Body Shop Australia.

SPECIFICATIONS

• Sheet dimensions
• Length: 180MM
• Width: 950MM
• Thickness: 12MM
• Total Weight: 1KG
• Weight/Sqm: 0.55KG

MATERIALS:
6mm open cell foam (lighter grey colour) and 6mm closed cell foam (darker foam on top).

​Material temperature resistance:
“Cold Resistance: – 40°C”
“Heat Resistance: short term + 135°C, long term +110°C”

Adhesive temperature resistance:
“Cold Resistance: -40°C”
“Heat Resistance: short term + 150°C, long term +135°C”
“Flame Retardant: Grade B2”
“Heat Conductivity Factor: <= 0.034 W/(M.K) at 0°C”

The post CAR BUILDERS ACOUSTIC LINER CARPET UNDERLAY- 1.7SQ appeared first on Body Shop Australia.

SPECIFICATIONS
Width: 38MM
Thickness: 50UM
Roll length: 10M
“Temperature range: -20°C to 110°C”
Adhesive type: Acyrlic

The post CAR BUILDERS FOIL TAPE 38MM x 10M appeared first on Body Shop Australia.

FEATURES:
Handle doubles as a convex tool to form products into irregular shapes
Radiused wheel to avoid marks and tearing – typically seen with cheaper square edged urethane wheels
Guarantees all product is stuck down and making contact with surface

ROLLER DIMENSIONS:
Wheel Diameter: 38mm
Width: 50mm

The post CAR BUILDERS APPLICATION ROLLER – 50MM appeared first on Body Shop Australia.